D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 178

DGS-3324SRi:4#config authen_enable method_list_name Trinity method
tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs
xtacacs local
Success.
DGS-3324SRi:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DGS-3324SRi:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DGS-3324SRi:4#
delete authen_enable method_list_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the user-defined method list "Permit":
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
delete authen_enable method_list_name <string 15>
This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Administrator level privileges.
<string 15> – Enter an alphanumeric string of up to 15 characters to
define the given enable method list to delete.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DGS-3324SRi:4#
170