D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 306

show dvmrp neighbor
Parameters
Restrictions
Example Usage:
To display DVMRP neighbor table:
DGS-3324SRi:4#show dvmrp neighbor
Command: show dvmrp neighbor
DVMRP Neighbor Address Table
Interface
---------------
System
Total Entries: 1
DGS-3324SRi:4#
show dvmrp nexthop
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display DVMRP routing next hop table:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
<ipif_name 12> − The name of the IP interface for which to display
the DVMRP neighbor table.
ipaddress <network_address> − The IP address and netmask of
the destination. The address and mask information can be
specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
Neighbor Address Generation ID
-----------------------
10.2.1.123
Used to display the current DVMRP routing next hop table.
show dvmrp nexthop {ipaddress <network_address> | ipif
<ipif_name 12>}
This command will display the DVMRP routing next hop table.
<ipif_name 12> − The name of the IP interface for which to display
the current DVMRP routing next hop table.
ipaddress <network_address> − The IP address and netmask of
the destination. The address and mask information can be
specified using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
None.
Expire Time
------------------- ---------
2 250
298