D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 204

To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only:
DGS-3324SRi:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5
Success.
DGS-3324SRi:4#
config ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set the SSL cachetimeout for 7200 seconds:
DGS-3324SRi:4#config ssl cachetimeout 7200
Command: config ssl cachetimeout 7200
Success.
DGS-3324SRi:4#
show ssl cachetimeout
Purpose
Syntax
Description
Parameters
Restrictions
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to configure the SSL cache timeout.
config ssl cachetimeout <value 60-86400>
This command will set the time between a new key exchange
between a client and a host using the SSL function. A new SSL
session is established every time the client and host go through a
key exchange. Specifying a longer timeout will allow the SSL
session to reuse the master key on future connections with that
particular host, therefore speeding up the negotiation process.
timeout <value 60-86400> - Enter a timeout value between 60 and
86400 seconds to specify the total time an SSL key exchange ID
stays valid before the SSL module will require a new, full SSL
negotiation for connection. The default cache timeout is 600
seconds
Only administrator-level users can issue this command.
Used to show the SSL cache timeout.
show ssl cachetimeout
Entering this command will allow the user to view the SSL cache
timeout currently implemented on the Switch.
None.
None.
196