D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 151

show igmp
Restrictions
Example Usage:
To display IGMP configurations:
DGS-3324SRi:4#show igmp
Command: show igmp
IGMP Interface Configurations
Interface IP Address/Netmask Ver- Query
------------ ---------------
System 10.90.90.90/8
p1 20.1.1.1/8
Total Entries: 2
DGS-3324SRi:4#
show igmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display IGMP group table:
DGS-3324SRi:4#show igmp group
Command: show igmp group
Interface
--------------------
System
System
System
System
System
xStack Gigabit Layer 3 Switch Command Line Interface Manual
None.
sion
----
1
1
Used to display the Switch's IGMP group table.
show igmp group {group <group> | ipif <ipif_name 12>}
This command will display the IGMP group configuration.
group <group> − The ID of the multicast group to be displayed.
<ipif_name 12> − The name of the IP interface the IGMP group is
part of.
None.
Multicast Group Last Reporter
------------------- --------------------- ------------------ -------------------
224.0.0.2 10.42.73.111
224.0.0.9 10.20.53.1
224.0.1.24 10.18.1.3
224.0.1.41 10.1.43.252
224.0.1.149 10.20.63.11
Maximum Robust- Last
Response ness
Time Value
------ -------- -------
125 10 2
125 10 2
IP Querier
10.48.74.122
10.48.74.122
10.48.74.122
10.48.74.122
10.48.74.122
143
State
Member
Query
Interval
----- -------
1 Enabled
1 Enabled
IP Expire
260
260
259
259
259