D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 313

show ipmc
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current IP multicast interface table by DVMRP entry:
DGS-3324SRi:4#show ipmc protocol dvmrp
Command: show ipmc protocol dvmrp
Interface Name
---------------
System
Total Entries: 1
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display the IP multicast interface table.
show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp |
pim}
This command will display the current IP multicast interface table.
<ipif_name 12> − The name of the IP interface for which to display
the IP multicast interface table for.
protocol − Allows the user to specify whether or not to use one of
the available protocols to display the IP multicast interface table.
For example, if DVMRP is specified, the table will display only
those entries that are related to the DVMRP protocol.
inactive – Specifying this parameter will display entries that
•
are currently inactive.
dvmrp – Specifying this parameter will display only those
•
entries that are related to the DVMRP protocol.
pim - Specifying this parameter will display only those entries
•
that are related to the PIM protocol.
None.
IP Address
---------------
10.90.90.90
Multicast Routing
----------------
DVMRP
305