D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 323

Usage Example
To display an OSPF area's settings:
DGS-3324SRi:4#show ospf area
Command: show ospf area
Area ID
--------------
0.0.0.0
10.48.74.122
Total Entries: 2
DGS-3324SRi:4#
create ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure the OSPF host route settings:
delete ospf host_route
Purpose
Syntax
Description
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Type Stub Import Summary LSA
------------- ------------------------------------
Normal None
Stub Enabled
Used to configure OSPF host route settings.
create ospf host_route <ipaddr> {area <area_id> | metric
<value 1-65535>}
This command is used to configure the OSPF host route settings.
<ipaddr> − The host's IP address.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
metric <value 1-65535> − A metric between 1 and 65535, which will
be advertised.
Only administrator-level users can issue this command.
DGS-3324SRi:4#create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Command: create ospf host_route 10.48.74.122 area 10.1.1.1
metric 2
Success.
DGS-3324SRi:4#
Used to delete an OSPF host route.
delete ospf host_route <ipaddr>
This command is used to delete an OSPF host route.
Stub Default Cost
-------------------
None
Enabled
315