D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 224

show auth_session_statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current authentication session statistics for port 16:
DGS-3324SRi:4#show auth_session_statistics ports 1:16
Command: show auth_session_statistics ports 1:16
Port number : 1:16
SessionOctetsRx
SessionOctetsTx
SessionFramesRx
SessionFramesTx
SessionId
SessionAuthenticMethod
SessionTime
SessionTerminateCause
SessionUserName
CTRL+C ESC q
xStack Gigabit Layer 3 Switch Command Line Interface Manual
BackendResponses
BackendAccessChallenges
BackendOtherRequestsToSupplicant
BackendNonNakResponsesFromSupplicant
BackendAuthSuccesses
BackendAuthFails
CTRL+C ESC q Quit SPACE n
Used to display the current authentication session statistics.
show auth_session_statistics {ports [<portlist> | all]}
The show auth_session statistics command is used to display
the current authentication session statistics of the Switch on a
per port basis.
ports <portlist> − Specifies a range of ports. The port list is
specified by listing the lowest switch number and the beginning
port number on that switch, separated by a colon. Then the
highest switch number, and the highest port number of the
range (also separated by a colon) are specified. The beginning
and end of the port list range are separated by a dash. For
example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port 4 − in numerical
order.
all – Specifies that all ports will be viewed.
None.
Quit SPACE n
Next Page Enter
0
0
0
0
Remote Authentication Server
0
SupplicantLogoff
Trinity
Next Page Enter Next Entry
216
0
0
0
0
0
0
Next Entry a All
a All