D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 56

show trusted_host
Parameters
Restrictions
Example Usage:
To display the list of trust hosts:
DGS-3324SRi:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
--------------------
10.53.13.94
Total Entries: 1
DGS-3324SRi:4#
delete trusted_host
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To delete a trusted host with an IP address 10.48.74.121:
enable snmp traps
Purpose
Syntax
Description
xStack Gigabit Layer 3 Switch Command Line Interface Manual
None.
None.
Used to delete a trusted host entry made using the create
trusted_host command above.
delete trusted _host <ipaddr>
This command is used to delete a trusted host entry made using
the create trusted_host command above.
<ipaddr> − The IP address of the trusted host.
Only administrator-level users can issue this command.
DGS-3324SRi:4#delete trusted_host 10.48.74.121
Command: delete trusted_host 10.48.74.121
Success.
DGS-3324SRi:4#
Used to enable SNMP trap support.
enable snmp traps
The enable snmp traps command is used to enable SNMP trap
t th S it h
48