D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 307

DGS-3324SRi:4#show dvmrp nexthop
Command: show dvmrp nexthop
Source IP Address/Netmask Interface Name Type
-----------------
10.0.0.0/8
10.0.0.0/8
20.0.0.0/8
20.0.0.0/8
30.0.0.0/8
30.0.0.0/8
Total Entries: 6
DGS-3324SRi:4#
show dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To show DVMRP configurations:
DGS-3324SRi:4#show dvmrp
Command: show dvmrp
DVMRP Global State : Disabled
Interface IP Address
------------
System
Trinity
Total Entries: 1
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display the current DVMRP settings on the Switch.
show dvmrp {<ipif_name 12>}
The command will display the current DVMRP routing table.
<ipif_name 12> − This parameter will allow the user to display
DVMRP settings for a specific IP interface.
None.
Neighbor Timeout Probe Metric State
--------------- ---------------
10.90.90.90/8 35
12.1.1.1/8 35
--------------- ------
ip2 Leaf
ip3 Leaf
System Leaf
ip3 Leaf
System Leaf
ip2 Leaf
----- ------
10 1
10 1
299
-------
Disabled
Enabled