D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 121

config scheduling_mechanism
Parameters
Restrictions
Example usage:
To configure the traffic scheduling mechanism for each COS queue:
DGS-3324SRi:4#config scheduling_mechanism strict
Command: config scheduling_mechanism strict
Success.
DGS-3324SRi:4#
show scheduling_mechanism
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To show the scheduling mechanism:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
before allowing the lower class to resume clearing its queue.
strict – Entering the strict parameter indicates that the highest
class of service is the first to be processed. That is, the highest
class of service should finish emptying before the others begin.
weight_fair – Entering the weight fair parameter indicates that the
priority classes of service will empty packets in a weighted round-
robin (WRR) order. That is to say that they will be emptied in an
even distribution.
Only administrator-level users can issue this command.
Used to display the current traffic scheduling mechanisms in use
on the Switch.
show scheduling_mechanism
This command will display the current traffic scheduling
mechanisms in use on the Switch.
None.
None.
113