D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 302

disable rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable rip:
DGS-3324SRi:4#disable rip
Command: disable rip
Success.
DGS-3324SRi:4#
show rip
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display RIP configuration:
DGS-3324SRi:4#show rip
Command: show rip
RIP Global State : Disabled
RIP Interface Settings
Interface
-------------
System
Total Entries : 1
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to disable RIP.
disable rip
This command is used to disable RIP on the Switch.
None.
Only administrator-level users can issue this command.
Used to display the RIP configuration and statistics for the
Switch.
show rip {ipif <ipif_name 12>}
This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
ipif <ipif_name 12> − The name of the IP interface for which to
display the RIP configuration and settings. If this parameter is not
specified, the show rip command will display the global RIP
configuration for the Switch.
None.
IP Address TX Mode
------------------ ----------
10.41.44.33/8 Disabled
RX Mode Authen-
tication
------------- ----------
Disabled Disabled Disabled
294
State
-----