D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 222

DGS-3324SRi:4#show acct_client
Command: show acct_client
radiusAcctClient
---------------------------------------------------------------------------------------
radiusAcctClientInvalidServerAddresses
radiusAcctClientIdentifier
radiusAuthServerEntry
---------------------------------------------------------------------------------------
radiusAccServerIndex
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
radiusAccClientPendingRequests
radiusAccClientTimeouts
radiusAccClientUnknownTypes
radiusAccClientPacketsDropped
CTRL+C ESC q
show auth_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS authentication client:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Quit SPACE n
Used to display the current RADIUS authentication client.
show auth_client
The show auth_client command is used to display the current
RADIUS authentication client currently configured on the Switch.
None.
None.
DGS-3324SRi:4#show auth_client
Command: show auth_client
radiusAuthClient
----------------------------------------------------------------------------------------
radiusAuthClientInvalidServerAddresses
radiusAuthClientIdentifier
radiusAuthServerEntry
----------------------------------------------------------------------------------------
radiusAuthServerIndex
radiusAuthServerAddress
0
D-Link
0
1
10.53.13.199
0
0
0
0
0
0
0
0
0
0
0
Next Page Enter Next Entry
0
D-Link
0
: 1
: 0.0.0.0
214
a All