D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 73

DGS-3324SRi:4#show log index 1-4
Command: show log index 1-4
Index Date
-----
4
3
2
1
DGS-3324SRi:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DGS-3324SRi:4#enable syslog
Command: enable syslog
Success.
DGS-3324SRi:4#
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Time
---------- --------
2000-03-02 01:54:53 Port 1:13 link up, 100Mbps FULL duplex
2000-03-02 01:54:53 Spanning Tree Protocol is enabled
2000-03-02 01:54:53 Unit 1, System started up
2000-02-28 06:06:09 Spanning Tree Protocol is disabled
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent
to a remote host.
None.
Only administrator-level users can issue this command.
Used to disable the system log function on the Switch.
disable syslog
The disable syslog command disables the system log function on
the Switch. After disabling, Syslog entries will no longer be sent to
a remote host.
None.
Only administrator-level users can issue this command.
Log Text
-----------------------------------------------------
65