D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 347

erase
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a file:
format
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To fast format the storage media accessory:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to delete a file from the storage media accessory.
erase {<pathname 64>}
This command is used to delete a file listed on the storage media
accessory.
<pathname 64> - Enter the path and name of the file to be deleted.
Only administrator-level users can issue this command.
DGS-3324SRi:4#erase c:/aaa.cfg
Command: erase c:/aaa.cfg
processing...100 %
Done!!
DGS-3324SRi:4#
To format the storage media accessory
format <drive> [FAT16] [fast | full | full_with_MBR] {<label_name
8>}
This command is used to format the storage media accessory.
<drive> – Specify the drive of the storage media accessory to be
formatted.
FAT16 – The type of file allocation table to be used to format the
storage media accessory.
[fast | full | full_with_mbr] – Choose the type of formatting to be done.
Fast - Denotes formatting just the file architecture of the storage
•
media accessory. This will not clear the data sectors.
full - Denotes a full format. This option will clear all sectors in a
•
partition except the Master Boot Record.
full_with_MBR – Dentoes that a full format will occur and all
•
sectors of the card will be cleared, including the Master Boot
Record.
<label_name 8> – Enter a previously set name associated with this
storage media accessory.
Only administrator-level users can issue this command.
339