D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 181

config authen application
Restrictions
Example usage:
To configure the default method list for the web interface:
DGS-3324SRi:4#config authen application http login default
Command: config authen application http login default
Success.
DGS-3324SRi:4#
show authen application
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the login and enable method list for all applications on the Switch:
DGS-3324SRi:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
---------------- ------------------
Console
Telnet
SSH
HTTP
DGS-3324SRi:4#
create authen server_host
Purpose
Syntax
xStack Gigabit Layer 3 Switch Command Line Interface Manual
method list. Enter a alphanumeric string of up to 15 characters to
define a previously configured method list.
Only administrator-level users can issue this command.
Used to display authentication methods for the various applications
on the Switch.
show authen application
This command will display all of the authentication method lists (login,
enable administrator privileges) for switch configuration applications
(console, telnet, SSH, web) currently configured on the Switch.
None.
None.
default
Trinity
default
default
Used to create an authentication server host.
create authen server_host <ipaddr> protocol [tacacs | xtacacs
| tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> |
------------------------
default
default
default
default
173