D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 311

show pim
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display PIM settings as configured on the Switch:
DGS-3324SRi:4#show pim
Command: show pim
PIM Global State : Disabled
PIM-DM Interface Table
Interface
------------
System
Total Entries : 1
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display current PIM configuration.
show pim {ipif <ipif_name 12>}
This command will list current PIM configuration settings for a
specified IP interface or all IP interfaces.
ipif <ipif_name 12> – The name of an IP interface for which PIM
settings are listed.
If no parameters are specified, all PIM settings are displayed for all
interfaces.
None.
Hello
IP Address Interval Interval
--------------- --------
10.90.90.90/8 35
Join/Prune
State
---------- --------
60 Enabled
303