D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 294
High-density layer 3 intelligent gigabit switch
Hide thumbs
Also See for xStack DGS-3324SRi:
- User manual (392 pages) ,
- User manual (362 pages) ,
- User manual (208 pages)
Table of Contents
Advertisement
enable bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable the BOOTP relay function:
DGS-3324SRi:4#enable bootp_relay
Command: enable bootp_relay
Success.
DGS-3324SRi:4#
disable bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable the BOOTP relay function:
DGS-3324SRi:4#disable bootp_relay
Command: disable bootp_relay
Success.
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to enable the BOOTP relay function on the Switch.
enable bootp_relay
This command, in combination with the disable bootp_relay
command below, is used to enable and disable the BOOTP relay
function on the Switch.
None.
Only administrator-level users can issue this command.
Used to disable the BOOTP relay function on the Switch.
disable bootp_relay
This command, in combination with the enable bootp_relay
command above, is used to enable and disable the BOOTP relay
function on the Switch.
None.
Only administrator-level users can issue this command.
286
Advertisement
Table of Contents
