D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 27

3
4
5
6
7
8
9
10
11
12
DXS-3326GSR:4#
show serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the serial port setting:
DGS-3324SRi:4#show serial_port
Command: show serial_port
Baud Rate
Data Bits
Parity Bits
Stop Bits
Auto-Logout
DGS-3324SRi:4#
config serial_port
Purpose
Syntax
Description
Parameters
xStack Gigabit Layer 3 Switch Command Line Interface Manual
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
Used to display the current serial port settings.
show serial_port
This command displays the current serial port settings.
None.
None.
: 115200
: 8
: None
: 1
: 10 mins
Used to configure the serial port.
config serial_port {baud_rate [115200] | auto_logout [never |
2_minutes | 5_minutes | 10_minutes | 15_minutes]}
This command is used to configure the serial port's baud rate
and auto logout settings.
baud_rate [115200] − The serial bit rate that will be used to
communicate with the management host. This parameter is fixed
at 115200.
auto_logout – The user may select a time period from the
following list which the Switch will automatically log out of the
serial port.
never − No time limit on the length of time the console can
•
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
19