D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 84

config system_severity
Restrictions
Example usage:
To configure the system severity:
show system_severity
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the system severity settings currently implemented on the Switch:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
critical – Entering this parameter along with the proper
•
destination, stated above, will instruct the Switch to send only
critical events to the Switch's log or SNMP agent.
warning – Entering this parameter along with the proper
•
destination, stated above, will instruct the Switch to send
critical and warning events to the Switch's log or SNMP agent.
information – Entering this parameter along with the proper
•
destination, stated above, will instruct the switch to send
informational, warning and critical events to the Switch's log or
SNMP agent.
Only administrator-level users can issue this command.
DGS-3324SRi:4#config system_severity trap critical
Command: config system_severity trap critical
Success.
DGS-3324SRi:4#
To display the current severity settings set on the Switch.
show system_severity
This command is used to view the severity settings that have been
implemented on the Switch using the config system_severity
command.
None.
None.
DGS-3324SRi:4#show system_severity
Command: show system_severity
system_severity log
system_severity trap
DGS-3324SRi:4#
: information
: criticial
76