D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 147

DGS-3324SRi:4#enable ipif s2
Command: enable ipif s2
Success.
DGS-3324SRi:4#
disable ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the IP interface named "s2":
DGS-3324SRi:4#disable ipif s2
Command: disable ipif s2
Success.
DGS-3324SRi:4#
delete ipif
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the IP interface named s2:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to disable the configuration of an IP interface on the Switch.
disable ipif {<ipif_name 12> | all}
This command will disable an IP interface on the Switch, without
altering its configuration values.
<ipif_name 12> − The name previously created to define the IP
interface.
all – Entering this parameter will disable all the IP interfaces
currently configured on the Switch.
None.
Used to delete the configuration of an IP interface on the Switch.
delete ipif {<ipif_name 12> | all}
This command will delete the configuration of an IP interface on
the Switch.
<ipif_name 12> − The name of the IP interface to delete.
all – Entering this parameter will delete all the IP interfaces
currently configured on the Switch.
None.
139