D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 25

SSL Status
SSH Status
802.1x
Jumbo Frame
Clipaging
MAC Notification
Port Mirror
SNTP
Bootp Relay
DNSR Status
VRRP
HOL Prevention State : Enabled
Syslog Global State
Single IP Management : Disabled
Dual Image
DGS-3324SRi:4#
show switch_mode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current switch mode:
DGS-3324SRi:4#show switch_mode
Command: show switch_mode
Switch is in Layer 3 mode
DGS-3324SRi:4#
show device_status
Purpose
Syntax
Description
Parameters
Restrictions
xStack Gigabit Layer 3 Switch Command Line Interface Manual
: Disabled
: Disabled
: Disabled
: Off
: Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Supported
Used to display the current switch mode.
show switch_mode
This command displays the current mode of operation of the
Switch.
None.
None.
Used to display the current status of the hardware of the Switch.
show device_status
This command displays the current status of the Switch's physical
elements.
None.
None.
17