D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 44

show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DGS-3324SRi:4#show snmp user
Command: show snmp user
Username
---------------
initial
Total Entries: 1
DGS-3324SRi:4#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an SNMP view:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to display information about each SNMP username in the
SNMP group username table.
show snmp user
The show snmp user command displays information about each
SNMP username in the SNMP group username table.
None.
Only administrator-level users can issue this command.
Group Name
--------------------
initial
Used to assign views to community strings to limit which MIB
objects and SNMP manager can access.
create snmp view <view_name 32> <oid> view_type [included |
excluded]
The create snmp view command assigns views to community
strings to limit which MIB objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be included or excluded from access by an SNMP manager.
included − Include this object in the list of objects that an SNMP
manager can access.
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Only administrator-level users can issue this command.
VerAuthPriv
---------------------
V3 None None
36