D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 324

delete ospf host_route
Parameters
Restrictions
Usage Example
To delete an OSPF host route:
DGS-3324SRi:4#delete ospf host_route 10.48.74.122
Command: delete ospf host_route 10.48.74.122
Success.
DGS-3324SRi:4#
config ospf host_route
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To configure an OSPF host route:
DGS-3324SRi:4#config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Command: config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2
Success.
DGS-3324SRi:4#
show ospf host_route
Purpose
Syntax
Description
xStack Gigabit Layer 3 Switch Command Line Interface Manual
<ipaddr> − The IP address of the OSPF host.
Only administrator-level users can issue this command.
Used to configure OSPF host route settings.
config ospf host_route <ipaddr> {area <area_id> | metric
<value>}
This command is used to configure an OSPF host route settings.
<ipaddr> − The IP address of the host.
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
<value> − A metric between 1 and 65535 that will be advertised for
the route.
Only administrator-level users can issue this command.
Used to display the current OSPF host route table.
show ospf host_route {<ipaddr>}
This command will display the current OSPF host route table.
316