D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 31

disable web
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable HTTP:
DGS-3324SRi:4#disable web
Command: disable web
Success.
DGS-3324SRi:4#
save
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To save the Switch's current configuration to non-volatile RAM:
DXS-3326GSR:4#save
Command: save
Do you want to change current box id from AUTO mode to STATIC
mode? (y/n) n
Saving all configurations to NV-RAM... Done.
DXS-3326GSR:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to disable the HTTP-based management software on the
Switch.
disable web
This command disables the Web-based management software
on the Switch.
None.
Only administrator-level users can issue this command.
Used to save changes in the Switch's configuration to non-volatile
RAM.
save [log | all]
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch's memory each time the Switch is restarted.
Entering just the save command will save only the Switch configuration
to NV-Ram.
log – Entering the log parameter will save only the log file to NV-RAM.
all – Entering the all command will save both the log file and the Switch
configuration to NV-RAM.
Only administrator-level users can issue this command.
23