D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 199

config ssh algorithm
Restrictions
Usage Example:
To configure SSH algorithm:
DGS-3324SRi:4# config ssh algorithm Blowfish enable
Command: config ssh algorithm Blowfish enable
Success.
DGS-3324SRi:4#
show ssh algorithm
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display SSH algorithms currently set on the Switch:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Encryption Standard AES256 encryption algorithm.
arcfour - This parameter will enable or disable the Arcfour encryption
algorithm.
blowfish - This parameter will enable or disable the Blowfish
encryption algorithm.
cast128 - This parameter will enable or disable the Cast128
encryption algorithm.
twofish128 - This parameter will enable or disable the twofish128
encryption algorithm.
twofish192 - This parameter will enable or disable the twofish192
encryption algorithm.
MD5 - This parameter will enable or disable the MD5 Message
Digest encryption algorithm.
SHA1 - This parameter will enable or disable the Secure Hash
Algorithm encryption.
DSA - This parameter will enable or disable the Digital Signature
Algorithm encryption.
RSA - This parameter will enable or disable the RSA encryption
algorithm.
[enable | disable] – This allows you to enable or disable algorithms
entered in this command, on the Switch.
Only administrator-level users can issue this command.
Used to display the SSH algorithm setting.
show ssh algorithm
This command will display the current SSH algorithm setting status.
None.
None.
191