D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 206

download certificate_fromTFTP
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download a certificate file and key file to the Switch:
DGS-3324SRi:4# download certificate_fromTFTP 10.53.13.94 certfilename
c:/cert.der keyfilename c:/pkey.der
Command: download certificate_fromTFTP 10.53.13.94 certfilename
c:/cert.der keyfilename c:/pkey.der
Certificate Loaded Successfully!
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to download a certificate file for the SSL function on the
Switch.
download certificate_fromTFTP <ipaddr> certfilename
<path_filename 64> keyfilename <path_filename 64>
This command is used to download a certificate file for the SSL
function on the Switch from a TFTP server. The certificate file is a
data record used for authenticating devices on the network. It
contains information on the owner, keys for authentication and digital
signatures. Both the server and the client must have consistent
certificate files for optimal use of the SSL function. The Switch only
supports certificate files with .der file extensions.
<ipaddr> - Enter the IP address of the TFTP server.
certfilename <path_filename 64> - Enter the path and the filename
of the certificate file to download.
keyfilename <path_filename 64> - Enter the path and the filename of
the key exchange file to download.
Only administrator-level users can issue this command.
198