D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 135

disable gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the Generic VLAN Registration Protocol (GVRP):
DGS-3324SRi:4#disable gvrp
Command: disable gvrp
Success.
DGS-3324SRi:4#
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to disable GVRP on the Switch.
disable gvrp
This command, along with enable gvrp below, is used to enable
and disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
None.
Only administrator-level users can issue this command.
Used to display the current VLAN configuration on the Switch.
show vlan {<vlan_name 32>}
This command displays summary information about each VLAN
including the VLAN ID, VLAN name, the Tagging/Untagging status,
and the Member/Non-member/Forbidden status of each port that is
a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which you want
to display a summary of settings.
None.
127