config command_history
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To configure the command history:
DGS-3324SRi:4#config command_history 20
Command: config command_history 20
Success.
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to configure the command history.
config command_history <value 1-40>
This command is used to configure the command history.
<value 1-40> − The number of previously executed commands
maintained in the buffer. Up to 40 of the latest executed
commands may be viewed.
None.
346