D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 70

show error ports
Restrictions
Example usage:
To display the errors of the port 3 of module 1:
DGS-3324SRi:4#show errors ports 1:3
Command:show errors ports 1:3
CRC Error
Undersize
Oversize
Fragment
Jabber
Drop Pkts
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the port utilization statistics:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
None.
RX Frames
---------------
19
0
0
0
11
20837
Used to display real-time port and cpu utilization statistics.
show utilization [ports | cpu]
This command will display the real-time port and cpu utilization
statistics for the Switch.
cpu – Entering this parameter will display the current cpu
utilization of the Switch, as a percentage.
ports - Entering this parameter will display the current utilization
of all ports on the Switch.
None.
Excessive Deferral
CRC Error
Late Collision
Excessive Collision
Single Collision
Collision
62
TX Frames
----------------
0
0
0
0
0
0