D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 333

show ospf ipif
Restrictions
Usage Example:
To display the current OSPF interface settings, for a specific OSPF interface:
DGS-3324SRi:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
Priority: 1
DR Address: 123.234.12.34
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Total Entries: 1
DGS-3324SRi:4#
show ospf all
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To display the current OSPF interface settings, for all OSPF interfaces on the Switch:
DGS-3324SRi:4#show ospf all
Command: show ospf all
Interface Name: System
Network Medium Type: BROADCAST
Area ID: 0.0.0.0
Priority: 1
DR Address: 10.42.73.10
Hello Interval: 10
Transmit Delay: 1
Authentication: None
Interface Name: ipif2
Network Medium Type: BROADCAST
Area ID: 1.0.0.0
xStack Gigabit Layer 3 Switch Command Line Interface Manual
None.
Used to display the current OSPF settings of all the OSPF
interfaces on the Switch.
show ospf all
This command will display the current OSPF settings for all OSPF
interfaces on the Switch.
None.
None.
IP Address: 123.234.12.34/24 ((Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
IP Address: 10.42.73.10/8 (Link Up)
Metric: 1
Administrative State: Enabled
DR State: DR
Backup DR Address: None
Dead Interval: 40
Retransmit Time: 5
IP Address: 123.234.12.34/24 ((Link Up)
Metric: 1
Administrative State: Enabled
325