D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 60

Example usage:
To configure the Switch location for "H Q 5 F ":
DGS-3324SRi:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DGS-3324SRi:4#
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "
enable rmon
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable RMON:
xStack Gigabit Layer 3 Switch Command Line Interface Manual
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name
of the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
DGS-3324SRi Stackable Switch
DGS-3324SRi:4#config snmp system_name DGS-3324SRi
Stackable Switch
Command: config snmp system_name DGS-3324SRi Stackable
Switch
Success.
DGS-3324SRi:4#
Used to enable RMON on the Switch.
enable rmon
This command is used, in conjunction with the disable rmon
command below, to enable and disable remote monitoring
(RMON) on the Switch.
None.
Only administrator-level users can issue this command.
52
":