D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 48

show snmp community
Parameters
Restrictions
Example usage:
To display the currently entered SNMP community strings:
DGS-3324SRi:4#show snmp community
Command: show snmp community
Total Entries: 3
DGS-3324SRi:4#
config snmp engineID
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To give the SNMP agent on the Switch the name "0035636666"
DGS-3324SRi:4#config snmp engineID 0035636666
Command: config snmp engineID 0035636666
Success.
DGS-3324SRi:4#
xStack Gigabit Layer 3 Switch Command Line Interface Manual
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch's SNMP
agent.
None.
SNMP Community Table
Community Name
-------------------------------- -------------------------------- ------------
dlink
private
public
Used to configure a name for the SNMP engine on the Switch.
config snmp engineID <snmp_engineID>
The config snmp engineID command configures a name for the
SNMP engine on the Switch.
<snmp_engineID> − An alphanumeric string that will be used to
identify the SNMP engine on the Switch.
Only administrator-level users can issue this command.
View Name
ReadView
CommunityView
CommunityView
40
Access Right
read_write
read_write
read_only