D-Link xStack DGS-3324SRi Command Line Interface Reference Manual page 83

xStack Gigabit Layer 3 Switch Command Line Interface Manual
To show syslog host information:
DGS-3324SRi:4#show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severity
------- ---------------
1 10.1.1.2
2 10.40.2.3
3 10.21.13.1
Total Entries : 3
DGS-3324SRi:4#
config system_severity
Purpose
Syntax
Description
Parameters
--------------
All
All
All
To configure when and where severity messages are to be
recorded.
config system_severity [trap | log | all] [critical | warning |
information]
This command is used to configure the system severity levels on the
Switch. When an event occurs on the Switch, a message will be sent
to the SNMP agent (trap), the Switch's log or both. Events occurring
on the Switch are separated into three main categories.
Information – Events classified as information are basic events
•
occurring on the Switch that are not deemed as problematic,
such as enabling or disabling various functions on the Switch.
Warning - Events classified as warning are problematic events
•
that are not critical to the overall function of the Switch but do
require attention, such as unsuccessful downloads or uploads
and failed logins.
Critical – Events classified as critical are fatal exceptions
•
occurring on the Switch, such as hardware failures or spoofing
attacks.
Choose one of the following to identify where severity messages are
to be sent.
trap – Entering this parameter will define which events
•
occurring on the Switch will be sent to a SNMP agent for
analysis.
log – Entering this parameter will define which events
•
occurring on the Switch will be sent to the Switch's log for
analysis.
all – Entering this parameter will define which events occurring
•
on the Switch will be sent to a SNMP agent and the Switch's
log for analysis.
Choose one of the following to identify what type of severity
warnings are to be sent to the destination entered above.
75
Facility UDP port Status
-------- -------- --------
Local0 514 Disabled
Local0 514 Disabled
Local0 514 Disabled