Country Code Not Programmed - Dodge ZB 2005 Service Manual

COMMUNICATION
Symptom:

COUNTRY CODE NOT PROGRAMMED

When Monitored and Set Condition:
COUNTRY CODE NOT PROGRAMMED
When Monitored: Continuously.
Set Condition: The BCM does not learn the country code within 10 seconds. DRL will
become enabled until country code is programmed.
SELECT CORRECT COUNTRY CODE
TEST
1 With the DRB, enter Body Computer, Miscellaneous then Change Country Code.
Select the correct country code for the vehicle.
With the DRB, erase BCM DTC's.
Cycle the ignition switch from off to on and wait approximately 1 minute.
With the DRB, read BCM DTC's.
Did this DTC reset?
Yes → Replace the Body Control Module in accordance with the service
→ Test Complete.
No
POSSIBLE CAUSES
ACTION
information.
Perform BODY VERIFICATION TEST - VER 1.
148
APPLICABILITY
All