Dodge ZB 2005 Service Manual page 1681

POWER DOOR LOCKS/RKE
DRIVER CYLINDER UNLOCK SWITCH STUCK —
TEST
4 Disconnect the Driver Cylinder Unlock Switch connector.
Measure the voltage between the Driver Cylinder Unlock Switch Mux circuit and
ground.
Is the voltage above 4.9 volts?
Yes → Replace the Driver Cylinder Unlock Switch.
→ Repair the Driver Cylinder Unlock Switch Mux circuit for a
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
partial short to ground.
Perform BODY VERIFICATION TEST - VER 1.
Continued
300
APPLICABILITY
All