Dodge ZB 2005 Service Manual page 1770

VTSS INDICATOR OUTPUT SHORT —
TEST
3 Turn the ignition off.
Disconnect the VTSS Indicator harness connector.
Disconnect the BCM C4 harness connector.
Measure the resistance between ground and the VTSS Indicator Driver circuit.
Is the resistance below 100 ohms?
Yes → Repair the VTSS Indicator Driver circuit for a short to ground.
→ Replace the Body Control Module in accordance with the Service
No
ACTION
Perform VTSS VERIFICATION TEST - 1A.
Information.
Perform VTSS VERIFICATION TEST - 1A.
VEHICLE THEFT/SECURITY
Continued
389
APPLICABILITY
All