Dodge ZB 2005 Service Manual page 1768

VTSS INDICATOR OUTPUT OPEN —
TEST
3 Turn the ignition off.
Disconnect the VTSS Indicator harness connector.
Measure the resistance between ground and the VTSS Indicator Ground circuit.
Is the resistance above 5.0 ohms?
Yes → Repair the VTSS Indicator Ground circuit for an open.
→ Replace the VTSS Indicator in accordance with the Service
No
4 Turn the ignition off.
Disconnect the VTSS Indicator harness connector.
Disconnect the BCM C4 harness connector.
Measure the resistance of the VTSS Indicator Driver circuit between the VTSS
Indicator connector and the BCM C4 connector.
Is the resistance above 5.0 ohms?
Yes → Repair the VTSS Indicator Driver circuit for an open.
→ Replace the Body Control Module in accordance with the Service
No
ACTION
Perform VTSS VERIFICATION TEST - 1A.
Information.
Perform VTSS VERIFICATION TEST - 1A.
Perform VTSS VERIFICATION TEST - 1A.
Information.
Perform VTSS VERIFICATION TEST - 1A.
VEHICLE THEFT/SECURITY
Continued
387
APPLICABILITY
All
All