Dodge ZB 2005 Service Manual page 1729

POWER WINDOWS
DRIVER WINDOW UP OUTPUT SHORT TO GROUND —
TEST
3 Turn the ignition off.
Disconnect the Driver Window Motor connector.
Disconnect the BCM C2 harness connector.
Measure the resistance between ground and the Driver Window Up Driver circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Driver Window Up Driver circuit for a short to ground.
→ Replace the Body Control Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
348
Continued
APPLICABILITY
All