Dodge ZB 2005 Service Manual page 1688

DRIVER EXTERIOR DOOR HANDLE SWITCH STUCK —
TEST
3 Disconnect the Driver Exterior Door Handle Switch connector.
Disconnect the Body Control Module C2 and C4 connectors.
Measure the resistance between ground and the Driver Exterior Door Handle Switch
Sense circuit in the BCM C4 connector.
Is the resistance below 10000.0 (10K) ohms?
Yes → Repair the Driver External Door Handle Switch Sense circuit for
→ Replace the Body Control Module.
No
ACTION
a short to ground
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
307
Continued
APPLICABILITY
All