Dodge ZB 2005 Service Manual page 1699

POWER DOOR LOCKS/RKE
PASSENGER INTERIOR DOOR HANDLE SWITCH STUCK —
TEST
3 Disconnect the Body Control Module C3 and C4 connectors.
Measure the resistance between ground and the Passenger Door Switch Mux circuit
in the BCM C3 connector.
Is the resistance below 10000.0 (10K) ohms?
Yes → Repair the Passenger Door Switch Mux circuit for a partial short
→ Go To 4
No
4 Disconnect the Body Control Module C3 and C4 connectors.
Measure the resistance between the Passenger Door Switch Mux circuit and the
Passenger Door Switch Return circuits in the BCM C3 and C5 connectors.
Is the resistance below 10000.0 (10K) ohms?
Yes → Repair the Passenger Door Switch Mux circuit for a partial short
→ Replace the Body Control Module.
No
ACTION
to ground
Perform BODY VERIFICATION TEST - VER 1.
to the Passenger Door Switch Return circuit.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
318
Continued
APPLICABILITY
All
All