Dodge ZB 2005 Service Manual page 1514

Table of Contents

Advertisement

Symptom:
*AIRBAG INDICATOR ON WITHOUT ACTIVE TROUBLE CODES
AIRBAG WARNING INDICATOR ON WITHOUT TROUBLE CODES
INSTRUMENT CLUSTER PROBLEMS
TEST
1
Turn the ignition on.
Make sure that all Airbag and Instrument Cluster active DTCs have been repaired
before performing this procedure.
With the DRBIII select MONITOR DISPLAY, WARNING LAMP STATUS and read
the PASSIVE RESTRAINTS, AIRBAG, MONITOR DISPLAY, WARNING LAMP
STATES.
With no active DTCs, Does the LAMP REQ by ACM monitor show ON?
Yes → WARNING:
→ Repair or replace the Instrument Cluster as necessary.
No
NOTE: When reconnecting Airbag system components, the ignition must be
turned off and the battery must be disconnected.
POSSIBLE CAUSES
ACTION
IF
THE AIRBAG
DROPPED AT ANY TIME, IT MUST BE REPLACED. Replace
the Airbag Control Module in accordance with Service Instruc-
tions.
Perform AIRBAG VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
CONTROL
MODULE
133
AIRBAG
APPLICABILITY
All
IS

Advertisement

Table of Contents
loading

Table of Contents