Dodge ZB 2005 Service Manual page 1657

INSTRUMENT CLUSTER
BCM - FUEL LEVEL SENDING UNIT INPUT SHORT TO GROUND —
Continued
TEST
3 Turn the ignition off.
Disconnect the Fuel Pump Module harness connector.
Disconnect the BCM C3 harness connector.
Measure the resistance between ground and the Fuel Level Sensor Signal circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Fuel Level Sensor Signal circuit for a short to ground.
→ Replace the Body Control Module in accordance with the Service
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
276
APPLICABILITY
All