INSTRUMENT CLUSTER
BCM - PWM DIMMING OUTPUT SHORT —
TEST
3
Turn the ignition off.
Disconnect the HVAC Control harness connector.
Disconnect the BCM C4 harness connector.
Measure the resistance between ground and the Panel Lamps Driver circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Panel Lamps Driver circuit for a short to ground
→ Go To 4
No
4
Turn the ignition off.
Disconnect the BCM C4 harness connector.
Disconnect the Radio harness connector.
Measure the resistance between ground and the Panel Lamps Driver circuit.
Is the resistance below 5.0 ohms?
Yes → Repair the Panel Lamps Driver circuit for a short to ground
→ Replace and program the Body Control Module in accordance
No
ACTION
between the BCM and the HVAC Control .
Perform BODY VERIFICATION TEST - VER 1.
between the BCM and the Radio.
Perform BODY VERIFICATION TEST - VER 1.
with the Service Information.
Perform BODY VERIFICATION TEST - VER 1.
Continued
278
APPLICABILITY
All
All