Dodge ZB 2005 Service Manual page 1690

DRIVER INTERIOR DOOR HANDLE SWITCH STUCK —
TEST
3 Disconnect the Body Control Module C2 and C3 connectors.
Measure the resistance between ground and the Driver Door Switch Mux circuit in
the BCM C3 connector.
Is the resistance below 10000.0 (10K) ohms?
Yes → Repair the Driver Door Switch Mux circuit for a partial short to
→ Go To 4
No
4 Disconnect the Body Control Module C2 and C3 connectors.
Measure the resistance between the Driver Door Switch Mux circuit and the Driver
Door Switch Return circuits in the BCM C2 and C3 connectors.
Is the resistance below 10000.0 (10K) ohms?
Yes → Repair the Driver Door Switch Mux circuit for a partial short to
→ Replace the Body Control Module.
No
ACTION
ground
Perform BODY VERIFICATION TEST - VER 1.
the Driver Door Switch Return circuit.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
POWER DOOR LOCKS/RKE
309
Continued
APPLICABILITY
All
All