Dodge ZB 2005 Service Manual page 1750

*PASSENGER WINDOW INOPERATIVE —
TEST
8 Remove the Passenger Window Down Relay.
Using a 12-volt test light connected to 12-volts, check the Passenger Window Down
Relay Ground circuit.
Does the test light illuminate brightly?
Yes → Replace the Relay.
→ Repair the Passenger Window Relay Ground for an open.
No
9 Remove the Passenger Window Down Relay.
Disconnect the Passenger Window Motor connector.
Measure the resistance of the Passenger Window Down Relay Output circuit between
the Relay connector and the Window Motor connector.
Is the resistance below 5.0 ohms?
Yes → Go To 10
→ Repair the Passenger Window Down Relay Output wire for an
No
10 Remove the Passenger Window Down Relay.
Measure the voltage of the Fused B+ circuit in the Passenger Window Down Relay
connector.
Is the voltage above 10.0 volts?
Yes → Replace the Relay.
→ Repair the Fused B+ circuit for an open.
No
11 Remove the Passenger Window Up Relay.
Using a 12-volt test light connected to 12-volts, check the Passenger Window Up
Relay Ground circuit.
Does the test light illuminate brightly?
Yes → Replace the Passenger Window Up Relay.
→ Repair the Passenger Window Relay Ground for an open.
No
12 Remove the Passenger Window Up Relay.
Disconnect the Passenger Window Motor connector.
Measure the resistance of the Passenger Window Up Relay Output circuit between
the Relay connector and the Window Motor connector.
Is the resistance below 5.0 ohms?
Yes → Go To 13
→ Repair the Passenger Window Up Relay Output wire for an open.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
open.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Continued
369
POWER WINDOWS
APPLICABILITY
All
All
All
All
All