Driver Seat Belt Switch Short To Battery - Dodge ZB 2005 Service Manual

AIRBAG
Symptom:

DRIVER SEAT BELT SWITCH SHORT TO BATTERY

When Monitored and Set Condition:
DRIVER SEAT BELT SWITCH SHORT TO BATTERY
When Monitored: With the ignition on the ACM monitors the Seat Belt Buckle Switch
circuit for an short to battery.
Set Condition: The code will set if the ACM detects high circuit voltage.
DRIVER SEAT BELT SWITCH SHORT TO BATTERY
DRIVER SEAT BELT SWITCH CIRCUITS SHORT TO BATTERY
ACM, DRIVER SEAT BELT SWITCH SHORT TO BATTERY
STORED CODE OR INTERMITTENT CONDITION
ACTIVE CODE PRESENT
TEST
1 NOTE: Ensure that the battery is fully charged.
Turn the ignition on.
NOTE: For the purpose of this test, the AECM and ORC modules will be
referred to as an ACM.
SELECT ACTIVE or STORED DTC:
ACM - ACTIVE DTC
ACM - STORED DTC
2 Turn the ignition off.
Disconnect the Driver Seat Belt Switch.
NOTE: Check connectors - Clean and repair as necessary.
Turn the ignition on.
With the DRBIII , read the active Airbag DTCs.
Does the DRB show DRIVER SEAT BELT SWITCH CIRCUIT OPEN?
Yes → Replace the Driver Seat Belt Switch Buckle Assembly.
→ Go To 3
No
POSSIBLE CAUSES
ACTION
Go To 2
Go To 4
Perform AIRBAG VERIFICATION TEST - VER 1.
36
APPLICABILITY
All
All