Dodge ZB 2005 Service Manual page 1613

HEATING & A/C
*BLOWER MOTOR INOPERATIVE —
TEST
9 Turn the ignition off.
Disconnect the Blower Motor harness connector.
Disconnect the A/C - Heater Control Module C1 harness connector.
Measure the resistance of the Blower Motor High Driver circuit between the Blower
Motor harness connector and the A/C - Heater Control Module C1 harness connector.
Is the resistance below 5 ohms?
Yes → Replace the Blower Motor in accordance with the Service Infor-
→ Repair the Blower Motor High Driver circuit for an open.
No
ACTION
mation.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Continued
232
APPLICABILITY
All