Dodge ZB 2005 Service Manual page 1745

POWER WINDOWS
PASSENGER WINDOW UP SHORT TO GROUND —
TEST
3 Turn the ignition off.
Remove the Passenger Window Up Relay.
Disconnect the BCM C2 harness connector.
Measure the resistance between ground and the Passenger Window Up Relay
Control circuit.
Is the resistance below 1000.0 ohms?
Yes → Repair the Passenger Window Up Relay Control circuit for a short
→ Replace the Body Control Module.
No
ACTION
to ground.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
364
Continued
APPLICABILITY
All