Vtss Lamp On Steady During Arming - Dodge ZB 2005 Service Manual

Symptom:

*VTSS LAMP ON STEADY DURING ARMING

CHECK FOR BCM DTC(S) AND VTSS ARMING INHIBITORS
INTERMITTENT CONDITION
TEST
1 Ensure hood and decklid are closed.
With the DRBIII check the following:
Read the BCM for any ignition switch, door entry switch or key cylinder switch
DTC's.
In Inputs/Outputs, check that the hood ajar and trunk ajar switch states display open
with the hood and decklid closed.
Were there any problems found?
Yes → Refer to the Symptom List and diagnose the appropriate symp-
→ Inspect the related wiring harness and switches for a possible
No
POSSIBLE CAUSES
ACTION
tom.
Perform VTSS VERIFICATION TEST - 1A.
intermittent condition. Look for any chafed, pierced, pinched or
partially broken wires.
Perform VTSS VERIFICATION TEST - 1A.
VEHICLE THEFT/SECURITY
397
APPLICABILITY
All