Error Messages; Table 4-6 Error Messages - Agilent Technologies N9360A Programming Manual

Error Messages

Table 4-6 Error Messages

Error No. Description
0 No error
–100 Other command error has occurred
–103 Command error due to an invalid separator
–112 Command error due to a program mnemonic is too long
–113 Command error due to an undefined header
–120 Command error due to a numeric data error
–123 Command error due to an exponent is too large
–124 Command error due to too many digits
–131 Command error due to an invalid suffix
–141 Command error due to invalid character data
–144 Command error due to character data is too long
–200 Execution error due to an invalid command
–222 Execution error due to data that is out of range
–350 Device dependent error due to a queue overflow
N9360A Multi UE Tester W-CDMA Programming Manual
Table 4-6 shows the Tester error messages of the Tester.
Programming Command Guidelines
4
4-19